banner



How To Set Date On Citizen Eco Drive Calibre 8700

Citizen Calibre 8700 BL8000-03A User Manual

loading

  Related Manuals for Citizen Calibre 8700 BL8000-03A

  Summary of Contents for Citizen Calibre 8700 BL8000-03A

  • Page 2: Tabular array Of Contents

    • Insufficient Charge Alarm Feature • Over Charge Prevention Feature • Ability Save Feature xi. General Reference for Charging Times ... 41 12. Solar-Powered Watch Handling Precautions ... 43 • Charging Precautions • Handling of Secondary Battery • Only Use the Specified Secondary Battery 13.
  • Page 3: Features

    1. Features This watch is a solar-powered lookout man that contains a solar cell in its face that drives the spotter by converting light energy into electrical energy. It is too equipped with numerous functions including a perpetual calendar that changes the date automatically...
  • Page 4 To utilize this watch comfortably, make sure to charge information technology before it stops running completely. Since there is no chance of overcharging no matter how much the watch is charged (Over Charge Prevention Feature), it is recommended that the watch exist...
  • Folio 5: Names Of Components

    3. Names of Components Mode Time (TME) Proper noun (one) Mode hand (2) Function hand Displays solar day (three) Appointment Displays date (4) Hour hand Displays hours (5) Minute hand Displays minutes (vi) Second hand Displays seconds 24-hour time brandish in (seven) 24 hr hand coordination with hr hand Calendar (CAL) Displays twenty-four hours...
  • Folio half dozen Non used Mode switching (2d paw stops at thirty seconds position) Local time correction (second manus continues moving in one-second intervals) Switches watch to reference position bank check mode when pressed continuously for ten seconds Non used Not used Not used...
  • Folio 7: Hand Reference Position Check And Correction

    If the reference position is not prepare properly, the fourth dimension, date, alert ON/OFF positions and other sentinel functions will non exist displayed properly. Before using this watch, cheque that the functions of the watch operate properly past performing the following procedure.
  • Page eight: Returning To Local Time Mode Subsequently Checking Reference Position

    Position one while the reference position is displayed. Note: • The watch will not return to the local time mode even if button (A) is pressed if the crown is pulled out to Position 1 or Position 2. In addition, information technology will not automatically return to the local time mode afterward 2 minutes.
  • Page 9 • Later the function mitt and date complete a demonstration movement (the function hand rotates backward by 180 degrees then returns to its original position, while the engagement moves in coordination with the function hand), the watch enters the agenda correction mode.
  • Page x "SUN" on the scale by slowly moving it one pace at a time. Annotation: Pressing button (A) causes the watch to enter the second hand reference position setting mode once more. 11. Return the crown to the normal position and printing push (A).
  • Page 11: Switching The Way (Brandish Function)

    Push (B) Notes: • If the crown is pulled out too far to Position ii, the sentinel enters the correction way • When switching the mode, slowly plow the crown until the style hand points to the • Render the crown to the normal position subsequently checking the way. Using the watch...
  • Folio 12: Setting The Time

    6. Setting the Fourth dimension 24 hour hand Hour hand Mode hand [Process for Setting the Time] i. Pull the crown out to Position 1 (the 2nd hand quickly advances to the xxx seconds position and waits). Note: If the 2d manus does not stop at the 30 seconds position, refer to the section on "Reference Position Correction"...
  • Page xiii: Setting The Date

    vii. Setting the Date This scout is equipped with a perpetual calendar that changes the year (number of years elapsed from the most recent leap year), calendar month, date and day automatically until February 28, 2100, including spring years, once the date has been set up.
  • Page 14 (counter-clockwise). 6. Press button (A). • The function hand moves from the year display to the twenty-four hours brandish and the picket enters the engagement correction mode. vii. Turn the crown to the gear up the date.
  • Folio 15: Using The Alert

    The alarm role uses a 24 60 minutes clock. Once the alert has been fix, the alarm sounds for xv seconds when the set up time is reached once a day. • When using the picket in each of time, calendar and alert modes, the alert sounds at the time that coincides with the fourth dimension mode.
  • Page sixteen: Setting The Warning Time

    vi. Return the crown to the normal position. [Switching Alarm ON and OFF] 1. Pull the crown out to Position i and so turn the crown to prepare the watch to the alert manner [ALM]. • The hour mitt and minute hand rapidly accelerate to the set alarm fourth dimension.
  • Folio 17: Alert Tone Monitor

    9. Setting the Local Time • The local time [L-TM] function lets you gear up the watch to a time in a different area from the time set in the time manner [TME]. • The time difference tin be corrected in 1 60 minutes units based on the time mode. The local time tin can be prepare over a range of ±23 hours based on the time mode.
  • Page 18: Functions Unique To Solar-Powered Watches

    Allow calorie-free to shine on the solar cell until the watch returns to i-2nd interval motion. Even after the watch has returned to 1-second interval movement, sufficiently charge the watch past exposing it to lite by referring to "11.
  • Folio 19 When charged Accuse the lookout by allowing light to shine on the solar prison cell until the watch begins to run. In the case the watch has stopped equally a result of being insufficiently charged, a minimum of 30 minutes are required until the scout begins to run again fifty-fifty if light shines on the solar cell.
  • Page 20: Insufficient Accuse Alarm Feature

    • Although the spotter volition begin to run when light is allowed to shine on the solar cell after information technology has stopped equally a result of existence insufficiently charged, since the time is wrong, reset the sentinel to the correct fourth dimension after sufficiently charging.
  • Folio 21: General Reference For Charging Times

    2 minutes under direct sunlight Total charge time: Time to fully recharge the lookout man after it has stopped. Ane day usage: Time required for recharging the sentry to run for one solar day with normal hand movement (1-second interval movement). Charging time...
  • Page 22: Solar-Powered Sentinel Handling Precautions

    • When you take the watch off, try to identify in as bright a location as possible and then that information technology will e'er exist charged and keep to run properly at all times.
  • Page 23: Handling Of Secondary Battery

    This can result in the take a chance of the sentry being damaged or injury to the wearer. When the secondary battery is replaced, always make sure to employ the specified secondary bombardment.
  • Page 24: All-Reset

    14. All-Reset This watch may non function properly as a effect of being subjected to the effects of static electricity, strong bear on and so forth. When this happens, perform the All-Reset and Reference Position Alignment procedures described below. When performing the all-reset procedure, kickoff make sure the scout is sufficiently charged and the second hand is moving at 1-second intervals.
  • Page 25: Precautions

    10/20 atmospheres 100/200 WATER RESIST(ANT) For correct use inside the design limits of the watch, confirm the level of water- resistance of your watch, every bit indicated on the dial and case, and consult the table. Moderate exposure to Pocket-size exposure to water water (washing, kitchen (washing face, pelting, etc.)
  • Page 26 • If moisture has entered the watch, or if the inside of the crystal is fogged up and does not become clear inside a day, immediately take the watch to your dealer or Citizen Service Center for repair. Leaving the picket in such a state will let corrosion to form within.
  • Page 27 Using the spotter where temperatures are outside the specified range, may result in deterioration of functions or fifty-fifty stoppage of the watch. • Do Non apply the watch in places where it is exposed to high temperature, such every bit in a sauna.
  • Folio 28: Specifications

    • Daily warning (24 hour clock, alarm monitor, alert ON/OFF) • Local time (fourth dimension unlike correction: 1 hour units) 7. Continuous Operating Times • Time until watch stops without charging after being fully charged: : Approx. 1.v years (with the power save characteristic operating continuously) : Approx.

How To Set Date On Citizen Eco Drive Calibre 8700,

Source: https://www.manualslib.com/manual/222829/Citizen-Calibre-8700-Bl8000-03a.html

Posted by: sheffieldwiffand.blogspot.com

0 Response to "How To Set Date On Citizen Eco Drive Calibre 8700"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel